Turnstile HMT3 Basic

Turnstile used for pedestrian access control.


Fast and safe
The HMT3 Basic turnstile is an economic version of HHT3 and offers a lighter construction and fewer options than HHT3. The turnstile is designed for continuous operation and can be successfully used in areas with smaller demand for passages/min.
Suitable areas: temporary solutions e.g. building sites, events etc.
The turnstile has a rotating spindle with 3 (120 degree) arms.

Mode of operation
The two-way mechanism enables traffic control in both directions or in a selected direction.
The LED pictograms (red cross & green arrow), easily visible and situated on the cabinet indicate the status of the turnstile (locked/unlocked). The red cross indicates passage closure, the green arrow indicates passage opening. The turnstile mechanism allows smooth entrance/exit and is equipped with a mechanical lock. The spindle is rotated manually by the user.


  • Turnstile mechanism is made of high quality steel and equipped with high quality bearings.
  • The control (HLB 23) has limited options
  • Easy access for service and maintenance in the cabinet
  • Illumination of passage as standard (controlled by a light sensor)
  • Pictogram (red/green) as standard on both sides of the cabinet
  • Prepared for external card reader
  • Hot dip galvanised spindle and cabinet as standard
  • Cage in HDG as standard
  • 10-15 passages/min
  • Mounted on steel plate (1200x1500mm)

Technical description

Total height
2530 mm
Other dimensions: on request.

Power supply voltage
230V AC, 50 Hz

Power consumption
Max 120 W


Feedback signal
Potential free contact – no/nc

Opening signal
Signal (max. 1 sec)

Operation environment
-25o to +50o C

305 kg

Relative humidity
Environmental 10-80%

IP protection rating

Hot dip galvanized steel, 1.5 mm

Profiles 60x60x3 mm, 40x40x2 mm, 40x30x2 mm and 25x25x1.5 mm

Spindle core tube
90×3 mm

Spindle arms
32×2 mm


  •  Overclimbing protection
  •  Fencing connection on post
  •  Roof in polycarbonate
  •  Powder coated cage in RAL colors.
  •  Mounted on concrete base instead of steel plate