Turnstile HHT3 900
Fully automatic turnstile used for pedestrian access control.
Advantages
Fast and safe
The turnstiles are designed for continuous operation and can be successfully used in areas with High frequency passages. Suitable areas: factories, commercial buildings, harbours etc.
The turnstile has a rotating spindle with 3 (120 degree) or 4 arms (90 degree), depending on requested security level.
Mode of operation
The two-way mechanism enables traffic control in both directions or in a selected direction.
The LED pictograms (red cross & green arrow), easily visible and situated on the cabinet indicate the status of the turnstile (locked/unlocked). The red cross indicates passage closure, the green arrow indicates passage opening. The turnstile mechanism allows smooth entrance/exit and is equipped with a mechanical, as well as a magnetic lock for optimal security. The spindle is motorised, ensuring smooth entrance/exit for the user.
Features
- Turnstile mechanism is made of high quality steel and equipped with high quality bearings.
Brake/locking system has a very short response time (from 0.03 to 0.12s).
In the event of a power failure, the mechanism will be automatically unlocked to allow safe exit from the building and will prevent entry. - The control (H104) has a wide range of options allowing various individual requirements
- Easy access for service and maintenance in the cabinet
- Illumination of passage as standard (controlled by a light sensor)
- Pictogram (red/green) as standard on both sides of the cabinet
- Prepared for external card reader
- Stainless steel spindle and cabinet as standard
- Cage in HDG as standard
- 15-20 passages/min
Technical description
Total height 2530 mm. Other dimensions: on request.
Power supply voltage 230V AC, 50 Hz
Power consumption Max 120 W
Current 5A
Feedback signal Potential free contact – no/nc
Opening signal Signal (max. 1 sec)
Operation environment -25 to +50 C
Weight HHT3 240 kg, HHT4 248 kg
Relative humidity Environmental 10-80%
IP protection rating 40
Cabinet Stainless steel, 1.5 mm
Cage Profiles 100x50x3 mm, 60x60x2 mm, 60x30x2 mm and 25x25x1.5 mm
Spindle core tube 90×3 mm
Spindle arms 38×2 mm
Options
-
Overclimbing protection
-
Roof in polycarbonate “Curved”
-
Roof in steel “Flat”
-
Powder coated cage in RAL colors.
-
Drain system for the roof “1 or 2 sided”
-
Special infills / Company logo
-
Under construction
-
Media consoles for access control systems
